The first two are usually loaded with For chipsets that support hardware cursors, this option enforces their use, even for cases that are known to cause problems on some machines. Hence you will see a line like. Easy Driver Pro performs a complete scan of your all of the devices in or attached to your computer. This is usually due to a problem with the ” LcdCenter ” option.

Uploader: Kazrakasa
Date Added: 27 September 2004
File Size: 39.9 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 49041
Price: Free* [*Free Regsitration Required]

Please read the section below about dual-head display. The exception is for 65555 of 1 or 4bpp where linear addressing is turned off by default. The flat panel timings are related to the panel size and not the size of the mode specified in xorg.

Chips and Technologies drivers – Chips and Technologies Video Drivers

You can use the ” SetMClk ” option in your xorg. This serial link allows an LCD screens to be located up to m from the video processor. The XVideo extension has only recently been added to the chips driver. The reason for this is that the manufacturer has used the panel timings to get a standard EGA mode to work on flat panel, and these same timings don’t work for an SVGA mode.

Chips and Technologies 65555 PCI BUS 65555 PCI BUS WinNT 4.­0 דרייבר הורדה בחינם (ver. 2.­4.­7)

The information contained on this site is for informational purposes only. These apps will allow you to check your Internet speed, get a PC backup and even tune-up your PC performance. Normally the colour transparency key for the overlay is the 8bpp lookup table entry So for unexplained problems not addressed above, please try to alter the clock you are using slightly, say in steps of 0.


Many laptops use the programmable clock of the x chips at the console. It also includes a fully programmable dot clock and supports all types of flat panels. Many potential programmable clock register setting are unstable. Also check the BIOS settings. When the size of the mode used is less than the panel size, the default behaviour of the server is to stretch the mode in an attempt to fill the screen.

So the driver will attempt to round-up the virtual X dimension to a multiple of 64, but leave the virtual resolution untouched.

Using this option, when the virtual desktop is scrolled away from the zero position, the pixmap cache becomes visible. This is the first chip of the ctxx series to support fully programmable clocks. The server itself can correctly detect the chip in the same situation.

The four options are for 8bpp or less, 16, 24 or 32bpp LCD panel clocks, where the options above set the clocks to 65MHz. It checks everything such as sound card, graphic card, monitor, mouse, printer, pdi. In fact the timing for the flat panel are dependent on the specification of the panel itself and are independent of the particular mode chosen.


See ct for details. This option is only useful when acceleration can’t be used and linear addressing can be used. It doesn’t occur under UnixWare 2.

The driver is capable of driving both a CRT and a flat panel display. However to use 655555 dual-head support is slightly more complex. For LCD screens, the lowest clock that gives acceptable contrast and flicker is usually pcu best one. However luckily there are many different clock register setting that can give the same or very similar clocks. In its current form, X can not take advantage of this second display channel.

The servers 65555 to this problem is not to do doubling vertically. So using this option disables the XVideo extension. XFree86 believes that the 8bpp framebuffer is overlayed on the 16bpp framebuffer. It is also possible that with a high dot clock and depth on a large screen there is very little bandwidth left for using the BitBLT engine.